{"id":6775,"date":"2022-01-02T22:44:45","date_gmt":"2022-01-02T15:44:45","guid":{"rendered":"https:\/\/gulfthai.com\/?page_id=6775"},"modified":"2024-01-30T15:10:49","modified_gmt":"2024-01-30T08:10:49","slug":"modern-control-engineering","status":"publish","type":"page","link":"https:\/\/gulfthai.com\/?page_id=6775","title":{"rendered":"Control Engineering for Robotics"},"content":{"rendered":"\n<p class=\"wp-block-paragraph\">03607341 Control Engineering for Robotics<br>Prerequisite: 01410260<br>3(3-0-6)<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Mathematical models of basic robotic systems. <br>Closed-loop and open-loop control systems. <br>Transfer function. <br>Time-domain and frequency-domain analysis and design of control systems. <br>Bode plots.<br>System stability. <br>PID and modified PID controller. <br>Pole placement.<br>Quadratic optimal regulator. <br>State observers. <br>Applications of various controllers for robotic systems.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><\/p>\n\n\n\n<figure class=\"wp-block-table\"><table><tbody><tr><td><\/td><td><\/td><td><\/td><\/tr><tr><td>1<\/td><td>Course introduction \/ Control System<br>Matlab &amp; Simulink<\/td><td><a href=\"https:\/\/matlabacademy.mathworks.com\/details\/matlab-onramp\/gettingstarted\">MATLAB Onramp<\/a><\/td><\/tr><tr><td>2<\/td><td>Differential Equation \/ Matlab &amp; Simulink<\/td><td><a href=\"https:\/\/matlabacademy.mathworks.com\/details\/simulink-onramp\/simulink\">Simulink Onramp<\/a><\/td><\/tr><tr><td>3<\/td><td>Mathematical models of mechanical system \/ Simscape<\/td><td><\/td><\/tr><tr><td>4<\/td><td>Transfer function. \/ State-Space.<\/td><td><a href=\"https:\/\/matlabacademy.mathworks.com\/details\/simscape-onramp\/simscape\">Simscape Onramp<\/a><\/td><\/tr><tr><td>5<\/td><td>Mathematical models of electrical system \/ Simscape<\/td><td><\/td><\/tr><tr><td>6<\/td><td>Transient and steady-state response analyses <\/td><td><\/td><\/tr><tr><td>7<\/td><td>PID controller design. Pole placement.<\/td><td><\/td><\/tr><tr><td><\/td><td><\/td><td><a href=\"https:\/\/matlabacademy.mathworks.com\/details\/control-design-onramp-with-simulink\/controls\">Control Design Onramp with Simulink<\/a><\/td><\/tr><tr><td>8<\/td><td>Routh\u2019s stability criterion. Root-Locus Method<\/td><td><\/td><\/tr><tr><td>9<\/td><td>Frequency-response, Bode diagrams.<br>Stability analysis in the frequency domain.<\/td><td><\/td><\/tr><tr><td>10<\/td><td>Classical controller design<\/td><td><\/td><\/tr><tr><td>11<\/td><td>Frequency-domain controller design <\/td><td><\/td><\/tr><tr><td>12<\/td><td>Control systems analysis in state space<\/td><td><\/td><\/tr><tr><td>13<\/td><td>Control Systems Design in State Space<br>Pole placement method \/ Quadratic optimal regulator<\/td><td><\/td><\/tr><tr><td>14<\/td><td>State observers in robotics \/ Modified PID controller design<\/td><td><\/td><\/tr><tr><td>15<\/td><td>Applications of various controllers for robotic systems<\/td><td><\/td><\/tr><tr><td><\/td><td><\/td><td><\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<h2 class=\"wp-block-heading\">PART 1<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">What is control system.<\/p>\n\n\n\n<figure class=\"wp-block-embed is-type-video is-provider-youtube wp-block-embed-youtube wp-embed-aspect-16-9 wp-has-aspect-ratio\"><div class=\"wp-block-embed__wrapper\">\n<iframe title=\"Robot Tour EP.1 | Stewart platform \u0e23\u0e31\u0e01\u0e29\u0e32\u0e01\u0e32\u0e23\u0e17\u0e23\u0e07\u0e15\u0e31\u0e27\u0e02\u0e2d\u0e07\u0e25\u0e39\u0e01\u0e1a\u0e2d\u0e25\" width=\"640\" height=\"360\" src=\"https:\/\/www.youtube.com\/embed\/1Rd3X37jbo0?feature=oembed\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen><\/iframe>\n<\/div><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">Introduction about lecturer project<br><a href=\"https:\/\/www.youtube.com\/watch?v=ydtXHcH6BZc\">Two-wheeled robot<\/a><br><a href=\"https:\/\/www.youtube.com\/watch?v=Ss34k2u8nQU&amp;t=88s\">Two-wheeled vehicle<\/a><br><a href=\"https:\/\/www.youtube.com\/watch?v=w8ytiD3jlUU\">small humanoid robot<\/a><br><a href=\"https:\/\/www.youtube.com\/watch?v=CZuT_q9fhKM\">engine control unit<\/a><br><a href=\"https:\/\/www.youtube.com\/watch?v=wgn9bzN_89I\">Diesel truck<\/a><br><a href=\"https:\/\/gulfthai.com\/?p=1631\">Train Simulator<\/a><br>SCADA Plant and&nbsp;<a href=\"https:\/\/gulfthai.com\/?p=1702\">Lab Scale<\/a><br>Tank Simulator and Firing Control<br><a href=\"https:\/\/www.youtube.com\/watch?v=5cLYeNEaFts&amp;t=16s\">ABB<\/a>&nbsp;<a href=\"https:\/\/www.youtube.com\/watch?v=7zpD-dIQu28\">Robot<\/a>&nbsp;\/<a href=\"https:\/\/www.youtube.com\/watch?v=e5-1T8zb5QM\">agriculture<\/a>&nbsp;<a href=\"https:\/\/www.youtube.com\/watch?v=5eBqp5ZEd1o\">2<\/a>&nbsp;\/&nbsp;<a href=\"https:\/\/www.youtube.com\/watch?v=r3_1gne2RUU\">ETC<\/a>&nbsp;\/&nbsp;<a href=\"https:\/\/www.youtube.com\/watch?v=uRWkTk6JK1s\">Steward<\/a><br><a href=\"https:\/\/www.youtube.com\/watch?v=UlrxGgKA0Tw&amp;t=2s\">Aero Dynamic Lab<\/a><br><a href=\"https:\/\/gulfthai.com\/?p=3159\">Pipe Inspection<\/a>&nbsp;with&nbsp;<a href=\"https:\/\/gulfthai.com\/?p=3160\">KNS<\/a><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Car Platoon<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><a href=\"https:\/\/www.volpe.dot.gov\/news\/how-automated-car-platoon-works\">https:\/\/www.volpe.dot.gov\/news\/how-automated-car-platoon-works<\/a><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Biped two-wheeled robot<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><a href=\"https:\/\/www.mathworks.com\/company\/mathworks-stories\/eth-zurich-students-design-and-build-jumping-robot.html\">https:\/\/www.mathworks.com\/company\/mathworks-stories\/eth-zurich-students-design-and-build-jumping-robot.html<\/a><\/p>\n\n\n\n<h2 class=\"wp-block-heading\"> Matlab Tools \/ (To study) matlab &amp; simulink<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\"><a href=\"https:\/\/eng.kps.ku.ac.th\/v3\/index.php\/forvisitor\/visitor-news\/item\/2899-matlab\/2899-matlab\">\u0e2d\u0e32\u0e08\u0e32\u0e23\u0e22\u0e4c \u0e1a\u0e38\u0e04\u0e25\u0e32\u0e01\u0e23\u0e41\u0e25\u0e30\u0e19\u0e34\u0e2a\u0e34\u0e15\u0e17\u0e38\u0e01\u0e04\u0e19\u0e02\u0e2d\u0e07\u0e21\u0e2b\u0e32\u0e27\u0e34\u0e17\u0e22\u0e32\u0e25\u0e31\u0e22\u0e40\u0e01\u0e29\u0e15\u0e23\u0e28\u0e32\u0e2a\u0e15\u0e23\u0e4c \u0e2a\u0e32\u0e21\u0e32\u0e23\u0e16\u0e40\u0e02\u0e49\u0e32\u0e43\u0e0a\u0e49\u0e42\u0e1b\u0e23\u0e41\u0e01\u0e23\u0e21 MATLAB \u0e44\u0e14\u0e49\u0e17\u0e35\u0e48 website \u0e14\u0e49\u0e32\u0e19\u0e25\u0e48\u0e32\u0e07 \u0e42\u0e14\u0e22\u0e25\u0e07\u0e17\u0e30\u0e40\u0e1a\u0e35\u0e22\u0e19\u0e14\u0e49\u0e27\u0e22 account@ku.th<\/a><br><a href=\"https:\/\/www.mathworks.com\/academia\/tah-portal\/kasetsart-university-31486487.html?fbclid=IwAR1XkorhqkAOEqbTqzeqOJmJ_vRUasHXxSPrv020XeI7aArEFE57pKkNWt4\">Login KU Account<\/a><br>Download License \u0e02\u0e2d\u0e07&nbsp;<a href=\"https:\/\/www.mathworks.com\/licensecenter\/total_headcount\/76101-67271-46953-41405-30928?s_tid=tah_po_start\">KU \u0e04\u0e25\u0e34\u0e4a\u0e01<\/a> <a href=\"https:\/\/matlabacademy.mathworks.com\/\">\u0e40\u0e23\u0e35\u0e22\u0e19\u0e1f\u0e23\u0e35\u0e44\u0e14\u0e49\u0e21\u0e32\u0e01\u0e01\u0e27\u0e48\u0e32<\/a><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">\u0e0b\u0e37\u0e49\u0e2d Student License <a href=\"https:\/\/www.mathworks.com\/store\/link\/products\/student\/new?s_tid=coabt_sv_cntsls_bod\">\u0e23\u0e32\u0e04\u0e32 29-55$<\/a>&nbsp;\u0e41\u0e25\u0e30 Toolkit \u0e23\u0e32\u0e04\u0e32\u0e15\u0e31\u0e27\u0e25\u0e30 6$<br>\u2014\u2014\u2014\u2014\u2014\u2014\u2014\u2014\u2014\u2014\u2014\u2014\u2014\u2014\u2014<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>\u0e27\u0e34\u0e18\u0e35\u0e25\u0e07\u0e40\u0e23\u0e35\u0e22\u0e19 Matlab <\/strong><\/p>\n\n\n\n<figure class=\"wp-block-embed is-type-video is-provider-youtube wp-block-embed-youtube wp-embed-aspect-16-9 wp-has-aspect-ratio\"><div class=\"wp-block-embed__wrapper\">\n<iframe title=\"matlab \u0e40\u0e23\u0e35\u0e22\u0e19\u0e44\u0e14\u0e49\u0e17\u0e35\u0e48\u0e44\u0e2b\u0e19\" width=\"640\" height=\"360\" src=\"https:\/\/www.youtube.com\/embed\/QrgnlMAABkM?feature=oembed\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen><\/iframe>\n<\/div><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">Matlab<\/p>\n\n\n\n<ol class=\"wp-block-list\">\n<li><strong>Course Overview<\/strong><br>Familiarize yourself with the course.<br>Course Overview<\/li>\n\n\n\n<li><strong>Commands<\/strong><br>Enter commands in MATLAB to perform calculations and create variables.<br>Entering Commands<br>Naming Variables<br>Saving and Loading Variables<br>Using Built-in Functions and Constants<\/li>\n\n\n\n<li><strong>MATLAB Desktop and Editor<\/strong><br>Write and save your own MATLAB programs.<br>MATLAB Desktop and Editor<br>The MATLAB Editor<br>Running Scripts<\/li>\n\n\n\n<li><strong>Vectors and Matrices<\/strong><br>Create MATLAB variables that contain multiple elements.<br>Manually Entering Arrays<br>Creating Evenly-Spaced Vectors<br>Array Creation Functions<\/li>\n\n\n\n<li><strong>Indexing into and Modifying Arrays<\/strong><br>Use indexing to extract and modify rows, columns, and elements of MATLAB arrays.<br>Indexing into Arrays<br>Extracting Multiple Elements<br>Changing Values in Arrays<\/li>\n\n\n\n<li><strong>Array Calculations<\/strong><br>Perform calculations on entire arrays at once.<br>Performing Array Operations on Vectors<\/li>\n\n\n\n<li><strong>Calling Functions<\/strong><br>Call functions to obtain multiple outputs.<br>Obtaining Multiple Outputs from Function Calls<\/li>\n\n\n\n<li><strong>Obtaining Help<\/strong><br>Use the MATLAB documentation to discover information about MATLAB features.<br>Obtaining Help<\/li>\n\n\n\n<li><strong>Plotting Data<\/strong><br>Visualize variables using MATLAB\u2019s plotting functions.<br>Plotting Vectors<br>Annotating Plots<\/li>\n\n\n\n<li><strong>Review Problems<\/strong><br>Bring together concepts that you have learned with a project.<br>Project \u2013 Electricity Usage<br>Project \u2013 Audio Frequency<\/li>\n\n\n\n<li><strong>Importing Data<\/strong><br>Bring data from external files into MATLAB.<br>Import Tool<br>Importing Data as a Table<\/li>\n\n\n\n<li><strong>Logical Arrays<\/strong><br>Use logical expressions to help you to extract elements of interest from MATLAB arrays.<br>Logical Indexing<\/li>\n\n\n\n<li><strong>Programming<\/strong><br>Write programs that execute code based upon some condition.<br>Programming Constructs<br>Decision Branching<br>For Loops<\/li>\n\n\n\n<li><strong>Final Project<\/strong><br>Bring together concepts that you have learned with a project.<br>Project \u2013 Stellar Motion<br>Project \u2013 Stellar Motion II<\/li>\n\n\n\n<li><strong>Conclusion<\/strong><br>Learn next steps and give feedback on the course.<br>Additional Resources<br>Survey<\/li>\n<\/ol>\n\n\n\n<!--nextpage-->\n\n\n\n<h2 class=\"wp-block-heading\">PART 2<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Introduction to Control Systems \u2022Speed Control System \/ Temperature control system<br>\u2022Controlled Variable and Control Signal or Manipulated Variable \u2022Processes \u2022Systems \u2022Plants \u2022Disturbances \u2022Feedback Control<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Control System De\ufb01nition<br>\u2022A control system consists of subsystems and processes (or plants) assembled for the purpose of obtaining a desired output with desired &nbsp;performance, given a speci\ufb01ed input<br>Open-loop vs closed-loop<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Advantages of Control Systems<\/strong><br>\u2022We build control systems for four primary reasons: \u20221. Power ampli\ufb01cation \u20222. Remote control \u20223. Convenience of input form \u20224. Compensation for disturbances<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Control Performance<\/strong><br>\u2022Transient Response \u2022Steady-State Response \u2022Stability \u2022<br>Antenna Azimuth: An Introduction to Position Control Systems<br>Feedback Control Systems<br>\u2022The output C(s) \u2022reference input R(s) \u2022 \u2022 \u2022plant transfer function G(s) \u2022feedback element transfer function is H(s)<br>Response of a position control system<br>\u2022response of a position control system, showing effect of high and low controller gain on the output response<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><a href=\"https:\/\/www.coursera.org\/learn\/differential-equations-engineers\/home\/welcome\">Differential Equations for Engineers<\/a><br>by The Hong Kong University of Science and Technology<br><a href=\"https:\/\/www.youtube.com\/c\/ProfJeffreyChasnov\/featured\">Prof. Jeffrey Chasnov<\/a><\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Introduction to Differential Equations<\/strong><br>MITx 18.031x<br>Introduction to Differential Equations<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Step modeling process<\/strong><br>Draw a diagram of the system.<br>Identify and give symbols for the parameters and variables of the system.<br>Decide on the input signal and the system response. Identify any initial conditions.<br>Write down a differential equation relating the input signal and the system response.<br>Rewrite the equation in standard linear form with initial conditions.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Newtonian mechanics<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Solving first-order linear ODEs<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Separation of variables for first order ODEs<br>Isolate the derivative and express in the form<br>Write as<br>Separation<br>Integrate<br>Solve for<br><a href=\"https:\/\/edx-video.net\/MIT180312016-V001200_DTH.mp4\">VDO<\/a> Standard linear form<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>\u0e40\u0e23\u0e35\u0e22\u0e19\u0e23\u0e39\u0e49 matlab \u0e1f\u0e23\u0e35<\/strong><br><a href=\"https:\/\/matlabacademy.mathworks.com\/R2020b\/portal.html?course=gettingstarted\">https:\/\/matlabacademy.mathworks.com\/R2020b\/portal.html?course=gettingstarted<\/a><\/p>\n\n\n\n<figure class=\"wp-block-embed is-type-wp-embed is-provider-gulf-thai wp-block-embed-gulf-thai\"><div class=\"wp-block-embed__wrapper\">\n<blockquote class=\"wp-embedded-content\" data-secret=\"Lw1jPnSla2\"><a href=\"https:\/\/gulfthai.com\/?page_id=3428\">Matlab &#038; Simulink Basic Programming<\/a><\/blockquote><iframe class=\"wp-embedded-content\" sandbox=\"allow-scripts\" security=\"restricted\" style=\"position: absolute; visibility: hidden;\" title=\"&#8220;Matlab &#038; Simulink Basic Programming&#8221; &#8212; Gulf Thai\" src=\"https:\/\/gulfthai.com\/?page_id=3428&#038;embed=true#?secret=pB176TzcjR#?secret=Lw1jPnSla2\" data-secret=\"Lw1jPnSla2\" width=\"600\" height=\"338\" frameborder=\"0\" marginwidth=\"0\" marginheight=\"0\" scrolling=\"no\"><\/iframe>\n<\/div><figcaption class=\"wp-element-caption\"><strong>Course Description<br>Modules<\/strong><br>Course Overview5 min100%<br>Simulink Graphical Environment15 min100%<br>Inspecting Signals10 min100%<br>Visualize signal values during simulation.<br><strong>Lessons:<\/strong><br>Inspecting Signals<br>Simulink Scopes Overview<br>Basic Algorithms15 min100%<br>Use math and logic operators to write algorithms.<br><strong>Lessons:<\/strong><br>Mathematical Operators<br>Basic Logic<br>Conditional Statements<br>Obtaining Help5 min100%<br>Access documentation from Simulink.<br><strong>Lessons:<\/strong><br>Obtaining Help<br>Project \u2013 Automotive Performance Modes5 min100%<br>Practice working with math and logic operators.<br><strong>Lessons:<\/strong><br>Project \u2013 Automotive Performance Modes<br>Simulink and MATLAB10 min100%<br>Use MATLAB variables and functions in Simulink.<br><strong>Lessons:<\/strong><br>MATLAB Workspace Variables<br>MATLAB Function Block<br>Dynamic systems in Simulink5 min100%<br>Review dynamic systems and learn how they relate to Simulink.<br><strong>Lessons:<\/strong><br>Dynamic Systems<br>Discrete systems15 min100%<br>Model discrete-time systems.<br><strong>Lessons:<\/strong><br>Discrete Systems<br>Continuous systems10 min100%<br>Model continuous-time systems.<br><strong>Lessons:<\/strong><br>Continuous Systems<br>Simulation Time5 min100%<br>Choose the simulation duration.<br><strong>Lessons:<\/strong><br>Simulation Time<br>Project \u2013 Modeling a Thermostat10 min100%<br>Practice your understanding of discrete dynamic systems.<br><strong>Lessons:<\/strong><br>Project \u2013 Thermostat<br>Project \u2013 Peregrine Falcon Dive10 min100%<br>Practice your understanding of continuous dynamic systems.<br><strong>Lessons:<\/strong><br>Project \u2013 Peregrine Falcon Dive<br>Conclusion5 min100%<br>Learn about next steps and give feedback on the course.<br><strong>Lessons:<\/strong><br>Additional Resources<br>Survey<\/figcaption><\/figure>\n\n\n\n<!--nextpage-->\n\n\n\n<h2 class=\"wp-block-heading\">Part 3<\/h2>\n\n\n\n<h2 class=\"wp-block-heading\">The three different problems<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">The system identification problem<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The simulation problem<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The control problem<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Why do we need a feedback control system<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">What is a control system : Stable System \/ Unstable System \/ Marginally Stable System<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Control Theory<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">\u2022<strong>Classical Control <\/strong><strong>Theory<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">transfer functions, Laplace domain representation \u2022<strong>Modern Control Theory<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">State space is a time domain representation, packaged in matrix form<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>&nbsp; Intelligence Control<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>&nbsp; <\/strong>Learning Control, Rule-Based Control<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Mathematical Models<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">\u2022<strong>Linear Systems &#8211; <\/strong>principle of superposition applies \u2013It is this principle that allows one to build up complicated solutions to the linear differential equation from simple solutions <br>\u2022<strong>Linear Time-Invariant Systems and Linear Time-Varying Systems<\/strong> \u2013<em>linear time-invariant <\/em>(or <em>linear constant-coefficient<\/em>) systems. \u2013An example of a time-varying control system is a spacecraft control system. (The mass of a spacecraft changes due to fuel consumption.) <\/p>\n\n\n\n<h2 class=\"wp-block-heading\">a linear and time-invariant (LTI) system<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Linear System Properties<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Homogeneity<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Superposition<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Impulse Function to  Linear System <br>input is a series of impulse functions<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Control Systems Lectures &#8211; LTI Systems<\/p>\n\n\n\n<figure class=\"wp-block-embed is-type-video is-provider-youtube wp-block-embed-youtube wp-embed-aspect-16-9 wp-has-aspect-ratio\"><div class=\"wp-block-embed__wrapper\">\n<iframe title=\"Control Systems Lectures - LTI Systems\" width=\"640\" height=\"360\" src=\"https:\/\/www.youtube.com\/embed\/3eDDTFcSC_Y?list=PLUMWjy5jgHK3j74Z5Tq6Tso1fSfVWZC8L\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen><\/iframe>\n<\/div><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">Control Systems. Lecture 1: Introduction to Linear Control Systems <\/p>\n\n\n\n<figure class=\"wp-block-embed is-type-video is-provider-youtube wp-block-embed-youtube wp-embed-aspect-16-9 wp-has-aspect-ratio\"><div class=\"wp-block-embed__wrapper\">\n<iframe title=\"Control Systems. Lecture 1: Introduction to Linear Control Systems\" width=\"640\" height=\"360\" src=\"https:\/\/www.youtube.com\/embed\/TyJSMVarQZQ?feature=oembed\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen><\/iframe>\n<\/div><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\"> MATLAB Simulation of INVERTED PENDULUM | Swing Up &amp; Balance Control | 3D Animation in VRML<\/p>\n\n\n\n<figure class=\"wp-block-embed is-type-video is-provider-youtube wp-block-embed-youtube wp-embed-aspect-16-9 wp-has-aspect-ratio\"><div class=\"wp-block-embed__wrapper\">\n<iframe title=\"MATLAB Simulation of INVERTED PENDULUM | Swing Up &amp; Balance Control |  3D Animation in VRML\" width=\"640\" height=\"360\" src=\"https:\/\/www.youtube.com\/embed\/4fNHH5reM8U?feature=oembed\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen><\/iframe>\n<\/div><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\"> <iframe title=\"Matlab Simulink Inverted Pendulum\" width=\"640\" height=\"360\" src=\"https:\/\/www.youtube.com\/embed\/sj9RpN-jJZM?feature=oembed\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen><\/iframe><\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Matlab Tools<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Control System Toolbox&#x2122;<br>Getting Started Guide<br>https:\/\/www.mathworks.com\/help\/releases\/R2021a\/pdf_doc\/control\/control_gs.pdf<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Control System Toolbox&#x2122;<br>User&#8217;s Guide<br>https:\/\/www.mathworks.com\/help\/releases\/R2021a\/pdf_doc\/control\/control_ug.pdf<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Mechanical Systems : <\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Mechanical Systems :  Spring<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Mechanical Systems : Damper<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Matlab Tools \/ (To study) <\/h2>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Course Description<br>Modules<\/strong><br>Course Overview5 min100%<br>Familiarize yourself with the course.<br><strong>Lessons:<\/strong><br>Course Overview<br>Explore a Simscape Model<br>Building Simscape Models15 min100%<br>Create your first Simscape models.<br><strong>Lessons:<\/strong><br><strong>Simscape Basics<\/strong><br>RC Circuit<br>Rotational Mass Damper<br>Exploring Results10 min100%<br>Learn how to explore the results of simulations.<br><strong>Lessons:<\/strong><br>Measuring Physical Quantities<br>Sensor Blocks<br>Understanding Physical Signals5 min100%<br>Learn about how information is carried through a Simscape model.<br><strong>Lessons:<\/strong><br>Physical Signals<br>Sources with Inputs<br>Initial Values in Simscape10 min100%<br>Set initial values in your Simscape models.<br><strong>Lessons:<\/strong><br>Initial Values as Targets<br>Setting Initial Values<br>Multidomain Modeling20 min100%<br>Model in the interactions between multiple physical domains.<br><strong>Lessons:<\/strong><br>Multidomain Modeling in Simscape<br>Electromechanical Conversion<br>The Fluid Domain<br>Hydroelectric Power Model<br>Simscape and Simulink5 min100%<br>Implement feedback control with Simscape and Simulink.<br><strong>Lessons:<\/strong><br>Feedback Control<br>Project \u2013 Electronic Valve5 min100%<br>Review what you have learned by modeling an electronic valve.<br><strong>Lessons:<\/strong><br>Project \u2013 Electronic Valve<br>Conclusion5 min100%<br>Learn about next steps and give feedback on the course.<br><strong>Lessons:<\/strong><br>Next Steps<br>Additional Resources<br>Survey<\/p>\n\n\n\n<!--nextpage-->\n\n\n\n<h2 class=\"wp-block-heading\">Part 4<\/h2>\n\n\n\n<h2 class=\"wp-block-heading\">Model-based design<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">MODELING IN STATE SPACE<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">\u2022<strong>Modern Control Theory<\/strong> \u2022 <br>\u2022<strong>State Variables <\/strong>smallest set of variables that determine the state of the dynamic system <br>\u2022<strong>State <\/strong>the smallest set of variables determines the behavior of the system for any time <br>\u2022<strong>State Vector <\/strong>n state variables are needed to completely describe the behavior of a given system <br>\u2022<strong>State Space<\/strong> <br>\u2022<strong>State-Space Equations<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>MODELING IN STATE SPACE<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Mathematical modeling of electrical systems<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Cascaded Elements<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Matlab Tools \/ (To study)<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\"><a href=\"https:\/\/matlabacademy.mathworks.com\/details\/control-design-onramp-with-simulink\/controls\">https:\/\/matlabacademy.mathworks.com\/details\/control-design-onramp-with-simulink\/controls<\/a><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Course Overview5 min100%<br>Familiarize yourself with control systems and the course.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Lessons:<br>Course Overview<br>Control Systems in Simulink<br>Control System Plants5 min100%<br>Learn about the control system plants, inputs, and outputs.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Lessons:<br>Control System Plants<br>Exploring the Plant<br>Linearizing the Plant with Model Linearizer10 min100%<br>Linearize the plant with Model Linearizer.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Lessons:<br>System Linearization<br>Linearizing the Plant<br>Linear Analysis<br>Analyzing the LTI System<br>Feedback Control with PID5 min100%<br>Learn about feedback control and PID controllers.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Lessons:<br>Feedback Control and PID Controllers<br>Implement a PID Controller<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">PID Tuning5 min50%<br>Tune a PID controller with PID Tuner to meet design requirements.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Lessons:<br>PID Tuner<br>Tune Your Controller<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Project &#8211; Robotic Leg Control10 min33%<br>Design a controller for the robotic leg with Simulink.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Lessons:<br>Robotic Leg Control Project<\/p>\n\n\n\n<!--nextpage-->\n\n\n\n<h2 class=\"wp-block-heading\">Part 5 <\/h2>\n\n\n\n<h2 class=\"wp-block-heading\">Transfer functions<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">\u2022are commonly used to characterize the input-output relationships of components or systems that can be described by linear, time-invariant, differential equations <br>\u2022ratio of the Laplace transform of the output (response function) to the Laplace transform of the input (driving function) under the assumption that all initial conditions are zero.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">\u2022using the concept of transfer function, it is possible to represent system dynamics by algebraic equations in s. If the highest power of s in the denominator of the transfer function is equal to n, the system is called an <em>nth-order system<\/em>.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">\u2022The transfer function is a property of a system itself, independent of the magnitude and nature of the input or driving function. <br>\u2022The transfer function includes the units necessary to relate the input to the output. \u2022<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Transfer Function<\/strong> \u2022<strong>Convolution Integral<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">multiplication in the complex domain is equivalent to convolution in the time domain<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">\u2022<strong>Impulse-Response Function<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">impulse-response function. This function g(t) is also called the weighting function of the system<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">\u2022<strong>Open-Loop Transfer Function<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">\u2022<strong>Feedforward Transfer Function<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">\u2022<strong>Closed-Loop Transfer Function<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Feedback (Closed-Loop) Transfer Functions with MATLAB<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>MATLAB Program<\/strong><\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Block Diagram<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Summing junctions and take off points<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">System, Nodes, Paths<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">(Forward) Paths , Loops (Feedback)<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Loops<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Common algebraic rules<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Moving a summing junction<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Moving a take off point<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Removing a forward parallel path<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Removing a feedback path<\/p>\n\n\n\n<!--nextpage-->\n\n\n\n<p class=\"wp-block-paragraph\">Part 6<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Operational Amplifiers<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Inverting Amplifier<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Two-Position or On\u2013Off Control Action<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">PID Controller<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">\u2022Three-term or PID controllers are probably the most widely used industrial controller. Even complex industrial control systems may comprise a control network whose main control building block is a PID control module <\/p>\n\n\n\n<p class=\"wp-block-paragraph\">\u2022The variable (e) represents the tracking error, the difference between the desired output (r) and the actual output (y). This error signal (e) is fed to the PID controller, and the controller computes both the derivative and the integral of this error signal with respect to time.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">\u2022The control signal (u) to the plant is equal to the proportional gain (Kp) times the magnitude of the error plus the integral gain (Ki) times the integral of the error plus the derivative gain (Kd) times the derivative of the error. \u2022<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Proportional Control Action<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Integral Control Action<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Proportional-Plus-Integral Control Action<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Proportional-Plus-Derivative Control Action<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Proportional-Plus-Integral-Plus-Derivative Control Action<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><\/p>\n\n\n\n<!--nextpage-->\n\n\n\n<p class=\"wp-block-paragraph\"> PART 7 <\/p>\n\n\n\n<!--nextpage-->\n\n\n\n<p class=\"wp-block-paragraph\"> PART 8<\/p>\n\n\n\n<!--nextpage-->\n\n\n\n<p class=\"wp-block-paragraph\"> PART 9<\/p>\n\n\n\n<!--nextpage-->\n\n\n\n<p class=\"wp-block-paragraph\"> PART 10<\/p>\n\n\n\n<!--nextpage-->\n\n\n\n<p class=\"wp-block-paragraph\"> PART 11<\/p>\n\n\n\n<!--nextpage-->\n\n\n\n<p class=\"wp-block-paragraph\"> PART 12<\/p>\n\n\n\n<!--nextpage-->\n\n\n\n<p class=\"wp-block-paragraph\"> PART 13<\/p>\n\n\n\n<!--nextpage-->\n\n\n\n<p class=\"wp-block-paragraph\"> PART 14<\/p>\n\n\n\n<!--nextpage-->\n\n\n\n<p class=\"wp-block-paragraph\"> PART 15<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">\u0e2a\u0e2d\u0e19 control design \u0e44\u0e21\u0e48\u0e44\u0e14\u0e49\u0e41\u0e01\u0e49\u0e2a\u0e21\u0e01\u0e32\u0e23\u0e14\u0e49\u0e27\u0e22\u0e21\u0e37\u0e2d \u0e43\u0e0a\u0e49\u0e1b\u0e23\u0e30\u0e2a\u0e34\u0e17\u0e18\u0e34\u0e20\u0e32\u0e1e\u0e04\u0e2d\u0e21\u0e43\u0e2b\u0e49\u0e2a\u0e39\u0e07\u0e2a\u0e38\u0e14\u0e0b\u0e34<\/p>\n\n\n\n<figure class=\"wp-block-embed is-type-rich is-provider-embed-handler wp-block-embed-embed-handler\"><div class=\"wp-block-embed__wrapper\">\n<div class=\"fb-post\" data-href=\"https:\/\/www.facebook.com\/p.robotics\/posts\/2020730098133306\" data-width=\"552\" style=\"background-color: #fff; display: inline-block;\"><\/div>\n<\/div><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\"><\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><\/p>\n\n\n\n<figure class=\"wp-block-table\"><table><tbody><tr><td><\/td><td><\/td><td><\/td><\/tr><tr><td>1<\/td><td>Course introduction<\/td><td>-About-<\/td><\/tr><tr><td>2<\/td><td>Transfer function and impulse-response function<\/td><td><\/td><\/tr><tr><td>3<\/td><td>Mathematical models of basic robotic systems (1)<\/td><td><\/td><\/tr><tr><td>4<\/td><td>Mathematical models of basic robotic systems (2)<\/td><td><\/td><\/tr><tr><td>5<\/td><td>Transient and steady-state response analyses<\/td><td><\/td><\/tr><tr><td>6<\/td><td>PID controller design<\/td><td><\/td><\/tr><tr><td>7<\/td><td>Frequency-response, Bode diagrams<\/td><td><\/td><\/tr><tr><td><\/td><td><\/td><td><\/td><\/tr><tr><td>8<\/td><td>Stability analysis in frequency domain<\/td><td><\/td><\/tr><tr><td>9<\/td><td>Frequency-domain controller design<\/td><td><\/td><\/tr><tr><td>10<\/td><td>Control systems analysis in state space<\/td><td><\/td><\/tr><tr><td>11<\/td><td>Pole placement method<\/td><td><\/td><\/tr><tr><td>12<\/td><td>Quadratic optimal regulator<\/td><td><\/td><\/tr><tr><td>13<\/td><td>State observers in robotics<\/td><td><\/td><\/tr><tr><td>14<\/td><td>Modified PID controller design<\/td><td><\/td><\/tr><tr><td>15<\/td><td>Applications of various controllers for robotic systems<\/td><td><\/td><\/tr><tr><td><\/td><td><\/td><td><\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\"><\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><\/p>\n","protected":false},"excerpt":{"rendered":"<p>03607341 Control Engineering for RoboticsPrerequisite: 014102603(3-0-6) Mathematical models of basic robotic systems. Closed-loop and open-loop control systems. Transfer function. Time-domain and frequency-domain analysis and design of control systems. Bode plots.System stability. PID and modified PID controller. Pole placement.Quadratic optimal regulator. State observers. Applications of various controllers for robotic systems. 1 Course introduction \/ Control SystemMatlab<br \/><a class=\"read-more\" href=\"https:\/\/gulfthai.com\/?page_id=6775\">Complete Reading<\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"footnotes":""},"class_list":["post-6775","page","type-page","status-publish","hentry"],"jetpack_sharing_enabled":true,"_links":{"self":[{"href":"https:\/\/gulfthai.com\/index.php?rest_route=\/wp\/v2\/pages\/6775","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/gulfthai.com\/index.php?rest_route=\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/gulfthai.com\/index.php?rest_route=\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/gulfthai.com\/index.php?rest_route=\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/gulfthai.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=6775"}],"version-history":[{"count":21,"href":"https:\/\/gulfthai.com\/index.php?rest_route=\/wp\/v2\/pages\/6775\/revisions"}],"predecessor-version":[{"id":8774,"href":"https:\/\/gulfthai.com\/index.php?rest_route=\/wp\/v2\/pages\/6775\/revisions\/8774"}],"wp:attachment":[{"href":"https:\/\/gulfthai.com\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=6775"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}