{"id":9570,"date":"2026-03-22T20:24:55","date_gmt":"2026-03-22T13:24:55","guid":{"rendered":"https:\/\/gulfthai.com\/?page_id=9570"},"modified":"2026-03-22T20:39:02","modified_gmt":"2026-03-22T13:39:02","slug":"2024-2-smart-embedded-system","status":"publish","type":"page","link":"https:\/\/gulfthai.com\/?page_id=9570","title":{"rendered":"2024\/2 Smart Embedded System"},"content":{"rendered":"\n<h2 class=\"wp-block-heading\">Final Project<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Sahachai Sampaongern 6330340099<br>Phumin Udomdach 6430340074<br>Anantaya Lanthong 6430340082<\/p>\n\n\n\n<figure class=\"wp-block-embed is-type-video is-provider-youtube wp-block-embed-youtube wp-embed-aspect-16-9 wp-has-aspect-ratio\"><div class=\"wp-block-embed__wrapper\">\n<iframe title=\"Propeller and Seesaw control Project\" width=\"640\" height=\"360\" src=\"https:\/\/www.youtube.com\/embed\/T5ON2vAHDmY?feature=oembed\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen><\/iframe>\n<\/div><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">Abstract<br>This project presents the design and implementation of a control system for a propeller and seesaw<br>balancing mechanism using PID control on the NI myRIO embedded platform. The primary goal is to<br>maintain the seesaw arm in a stable horizontal position and to automatically return it to that position<br>when disturbed. A potentiometer is used to measure the tilt angle of the seesaw, while a DC motor<br>driving a propeller serves as the actuator to generate counter-balancing force. The control algorithm,<br>developed in the LabVIEW programming environment, enables real-time error correction and dynamic<br>stabilization using PWM signals.<br>The PID controller continuously calculates the error between the target angle (Setpoint) and the actual<br>angle (Feedback), adjusting motor output to correct the tilt. The system is capable of detecting<br>disturbances and autonomously restoring the seesaw to its balanced state. Experimental results show<br>that the system achieves accurate and reliable control, maintaining stability and quick recovery when<br>perturbed.<br>This project demonstrates the potential of combining LabVIEW and NI myRIO for educational and<br>research applications in automatic control systems, especially in areas requiring real-time feedback and<br>dynamic response such as robotics and mechanical balancing platforms.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Tanawat Unsiwilai 6430340058<br>Peeraphan Chanpe 6430340066<\/p>\n\n\n\n<figure class=\"wp-block-embed is-type-video is-provider-youtube wp-block-embed-youtube wp-embed-aspect-16-9 wp-has-aspect-ratio\"><div class=\"wp-block-embed__wrapper\">\n<iframe title=\"Final Project Propeller and Seesaw control Labview\" width=\"640\" height=\"360\" src=\"https:\/\/www.youtube.com\/embed\/ZbIzwxoSQ6Y?feature=oembed\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen><\/iframe>\n<\/div><\/figure>\n\n\n\n<ol class=\"wp-block-list\">\n<li>Introduction<br>This project demonstrates the application of LabVIEW programming with the NI myRIO<br>embedded system to control a motorized seesaw. The objective is to maintain balance by<br>reading sensor data, calibrating input, and implementing a control loop with state machine<br>logic.<\/li>\n<\/ol>\n\n\n\n<p class=\"wp-block-paragraph\">Tanatorn Khamkwan 6430340040, <\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Taspon Wongprasertsiri 6430340031<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><a href=\"https:\/\/o365ku.sharepoint.com\/sites\/242SmartEmbeddedSystem\/_layouts\/15\/streamembed.aspx?uniqueId=dd8dcc7e-3bd7-42ab-b44c-15629389feb6&amp;embed=%7B%22ha%22%3A%22teams%22%2C%22hv%22%3A%22assignments%22%2C%22hm%22%3A%22view%22%2C%22hp%22%3A%22web%22%2C%22nb%22%3Atrue%2C%22hrv%22%3A%22speedGrader%22%2C%22hvn%22%3A%22aui.v20260316.1%22%2C%22t0%22%3A25491.30000001192%2C%22t0to%22%3A1774185806962.3%2C%22tcs%22%3A25491.30000001192%2C%22tcsto%22%3A1774185806962.3%2C%22hvm%22%3Afalse%2C%22hsi%22%3A%2271053cba-3a74-47e5-9aa5-b6243e4a7eea%22%2C%22he%22%3A%22Prod%22%7D\">https:\/\/o365ku.sharepoint.com\/sites\/242SmartEmbeddedSystem\/_layouts\/15\/streamembed.aspx?uniqueId=dd8dcc7e-3bd7-42ab-b44c-15629389feb6&amp;embed=%7B%22ha%22%3A%22teams%22%2C%22hv%22%3A%22assignments%22%2C%22hm%22%3A%22view%22%2C%22hp%22%3A%22web%22%2C%22nb%22%3Atrue%2C%22hrv%22%3A%22speedGrader%22%2C%22hvn%22%3A%22aui.v20260316.1%22%2C%22t0%22%3A25491.30000001192%2C%22t0to%22%3A1774185806962.3%2C%22tcs%22%3A25491.30000001192%2C%22tcsto%22%3A1774185806962.3%2C%22hvm%22%3Afalse%2C%22hsi%22%3A%2271053cba-3a74-47e5-9aa5-b6243e4a7eea%22%2C%22he%22%3A%22Prod%22%7D<\/a><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">This technical report presents the comprehensive development and implementation of a<br>control system designed specifically for a seesaw mechanism actuated by a high-speed<br>propeller. The control strategy is based on feedback from sensors and real-time actuation<br>through the National Instruments (NI) myRIO embedded platform. The overall aim of this<br>project is to create a responsive, closed-loop control system that is capable of maintaining a<br>user-defined tilt angle on the seesaw. By adjusting the rotational speed of a DC motor\u0002driven propeller based on real-time sensor input, the system ensures stability and accurate<br>position control throughout various operating conditions.<\/p>\n\n\n\n<ol start=\"2\" class=\"wp-block-list\">\n<li>System Overview<br>2.1 Hardware Components<\/li>\n<\/ol>\n\n\n\n<ul class=\"wp-block-list\">\n<li>NI myRIO: Functions as the core real-time control unit. It provides integrated<br>analog\/digital input and output channels along with PWM signal generation, making it<br>highly suitable for embedded control applications.<\/li>\n\n\n\n<li>DC Motor with Propeller: This is the main actuator, responsible for applying force to alter<br>the seesaw&#8217;s angular position. Controlled via PWM signals, its speed and direction<br>determine the system&#8217;s dynamic behavior.<\/li>\n\n\n\n<li>Position Sensors: Two analog position sensors connected to myRIO\u2019s analog inputs (A\/AI0<br>and A\/AI2) deliver voltage signals corresponding to the current and desired angles, which<br>are then used for feedback and setpoint reference.<\/li>\n\n\n\n<li>3-Axis Accelerometer: This component provides acceleration data in X, Y, and Z directions,<br>allowing for improved sensing of the system&#8217;s tilt and motion characteristics during<br>dynamic transitions.<br>2.2 Software Platform<br>LabVIEW: The software environment used for developing the control algorithm, interfacing<br>with hardware, visualizing data in real time, and enabling user interactivity. Its graphical<br>programming approach simplifies complex control logic implementation.<\/li>\n<\/ul>\n\n\n\n<h2 class=\"wp-block-heading\">Mid-term Project<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Phumin UDOMDACH<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">This report presents the development of an automated Milk Conveyor System using<br>LabVIEW. The project simulates a conveyor belt system that transports milk bottles and ensures<br>they are processed correctly. The system is designed to automate the movement of bottles, check<br>for proper filling, and manage the workflow efficiently, reducing human error and optimizing the<br>manufacturing process.<br>Problem Statement:<br>In many industrial applications, manual handling of products on conveyor systems can<br>lead to inefficiencies, errors, increased labor costs, and reduced production rates. The risk of<br>human error can result in inconsistent product quality, delays in production, and potential losses.<br>To address these issues, this project aims to design a virtual conveyor system in LabVIEW that<br>ensures bottles are transported accurately, undergo proper quality checks, and integrate<br>automation for process optimization. By simulating an industrial setup in LabVIEW, we can<br>develop a prototype that provides a foundation for real-world applications in factory automation,<br>quality control, and industrial robotics.<\/p>\n\n\n\n<ol start=\"2\" class=\"wp-block-list\">\n<li>Algorithm &amp; Flowchart<br>Algorithm:<\/li>\n\n\n\n<li>Initialize the System \u2013 Start conveyor belt simulation and initialize all necessary<br>parameters such as speed, timing, and detection.<\/li>\n\n\n\n<li>Bottle Detection \u2013 Detect when a milk bottle is placed on the conveyor using a simulated<br>sensor input.<\/li>\n\n\n\n<li>Filling Process \u2013 Simulate the milk-filling mechanism by checking whether a bottle is in<br>the filling zone and activating the filler accordingly.<\/li>\n\n\n\n<li>Quality Check \u2013 Ensure each bottle is filled correctly before moving forward using<br>predefined quality control logic.<\/li>\n\n\n\n<li>Sorting &amp; Output \u2013 Properly sort the bottles based on their filling status, redirecting<br>underfilled or overfilled bottles for correction.<\/li>\n\n\n\n<li>Stop Condition \u2013 The conveyor stops when all bottles are processed or a manual stop<br>signal is received.<\/li>\n<\/ol>\n\n\n\n<p class=\"wp-block-paragraph\">Tanawat UNSIWILAI<\/p>\n\n\n\n<ol class=\"wp-block-list\">\n<li>Problem Definition (Scenario in Engineering)<br>To sense the temperature is compulsory at a lot of the places e.g. refrigerators, air conditioners, storage<br>rooms, kitchen etc. At these places to sense the temperature and its proper indication is compulsory<br>because it can cause serious problems otherwise. For example, if the temperature in the food storage room<br>is higher than an adjusted threshold, it will be harmful for all of the food items. You can also consider<br>&#8220;Fire Alarm&#8221; as an example of temperature sensor. First of all it measures the level of the temperature. If<br>it founds that the temperature is higher than the adjusted threshold, it starts to beep<br>In many industrial and domestic applications, temperature monitoring and control are crucial for<br>maintaining safety, efficiency, and performance. Traditional temperature measurement methods involve<br>manual readings and limited real-time monitoring. The lack of an automated, accurate, and real-time<br>temperature sensing system can result in inefficiencies, equipment damage, or even hazardous conditions.<br>To address this issue, a LabVIEW-based temperature sensing system is designed to continuously measure,<br>display, and analyze temperature variations. This system provides real-time data acquisition and<br>visualization, enhancing monitoring capabilities and decision-making processes.<\/li>\n<\/ol>\n\n\n\n<p class=\"wp-block-paragraph\"><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Anantaya LANTHONG<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Need of Smart Control of Traffic Signals<br>Traffic congestion in urban areas is becoming a significant issue due to the increasing population and the<br>growing number of vehicles.<br>Traffic jams not only cause delays and stress for drivers but also lead to higher fuel consumption,<br>increased transportation costs, and air pollution caused by carbon dioxide emissions.<br>There are various causes of traffic congestion, such as insufficient road capacity, uncontrolled demand,<br>and excessively long red-light durations.<br>Traffic lights are one of the critical factors affecting traffic flow.<br>Conventional Traffic Control Systems<br>Manual Controlling<br>Manual traffic control requires human labor, such as traffic police, who are assigned to manage traffic in<br>specific areas.<br>Traffic police use signboards, signal lights, and whistles to direct the flow of traffic.<br>Automatic Controlling<br>Automatic traffic lights operate using timers and electrical sensors.<br>The lights turn on and off automatically based on predetermined numerical values set in the timer.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Sahachai SAMPAONGERN<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Mini Project<br>Mr.Sahachai Sampaongern 6330340099<br>DC Motor Speed Control System with Feedback Sensor<\/p>\n\n\n\n<ol class=\"wp-block-list\">\n<li>System Overview and Working Sequence<br>The speed control system for a DC motor using a feedback sensor<br>operates by continuously measuring the motor&#8217;s speed and<br>adjusting the control signal to maintain the desired speed (setpoint).<br>The process is carried out using a closed-loop feedback control<br>system and commonly utilizes a PID controller to minimize the error<br>between the desired speed and the actual speed.<\/li>\n\n\n\n<li>Steps of the Working Sequence<br>2.1 Setpoint Initialization<\/li>\n<\/ol>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Setpoint represents the desired speed for the DC motor (e.g.,<br>150 RPM).<\/li>\n\n\n\n<li>The user inputs the desired speed via a Numeric Control on the<br>Front Panel of LabVIEW, setting the reference speed for the<br>system to achieve.<br>2.2 Measured Speed<\/li>\n\n\n\n<li>The Measured Speed is obtained from a feedback sensor, such<br>as an encoder or tachometer, which measures the motor&#8217;s<br>actual rotational speed in real time.<\/li>\n\n\n\n<li>This feedback value is continuously monitored and fed into the<br>system for comparison with the Setpoint.<br>2.3 Error Calculation<\/li>\n\n\n\n<li>The Error is calculated as the difference between the Setpoint<br>(desired speed) and the Measured Speed (actual speed of the<br>motor):<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Peeraphan CHANPE<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Scenario: Automated Tank Filling and Monitoring System\u00a0<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Tanatorn KHAMKWAN<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">This project is a simulation of a traffic light, you can choose the time for each light it will cycle between each light<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Taspon WONGPRASERTSIRI<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Tank fill level control can be used in simulations in LabVIEW.<br>Learn how to control the filling or draining of a tank in<\/p>\n","protected":false},"excerpt":{"rendered":"<p>Final Project Sahachai Sampaongern 6330340099Phumin Udomdach 6430340074Anantaya Lanthong 6430340082 AbstractThis project presents the design and implementation of a control system for a propeller and seesawbalancing mechanism using PID control on the NI myRIO embedded platform. The primary goal is tomaintain the seesaw arm in a stable horizontal position and to automatically return it to that<br \/><a class=\"read-more\" href=\"https:\/\/gulfthai.com\/?page_id=9570\">Complete Reading<\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"footnotes":""},"class_list":["post-9570","page","type-page","status-publish","hentry"],"jetpack_sharing_enabled":true,"_links":{"self":[{"href":"https:\/\/gulfthai.com\/index.php?rest_route=\/wp\/v2\/pages\/9570","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/gulfthai.com\/index.php?rest_route=\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/gulfthai.com\/index.php?rest_route=\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/gulfthai.com\/index.php?rest_route=\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/gulfthai.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=9570"}],"version-history":[{"count":2,"href":"https:\/\/gulfthai.com\/index.php?rest_route=\/wp\/v2\/pages\/9570\/revisions"}],"predecessor-version":[{"id":9573,"href":"https:\/\/gulfthai.com\/index.php?rest_route=\/wp\/v2\/pages\/9570\/revisions\/9573"}],"wp:attachment":[{"href":"https:\/\/gulfthai.com\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=9570"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}