{"id":8158,"date":"2023-03-18T23:21:52","date_gmt":"2023-03-18T16:21:52","guid":{"rendered":"https:\/\/gulfthai.com\/?p=8158"},"modified":"2024-02-04T15:50:08","modified_gmt":"2024-02-04T08:50:08","slug":"%e0%b9%80%e0%b8%97%e0%b8%84%e0%b9%82%e0%b8%99%e0%b9%82%e0%b8%a5%e0%b8%a2%e0%b8%b5-3d-printer-%e0%b8%aa%e0%b8%b3%e0%b8%ab%e0%b8%a3%e0%b8%b1%e0%b8%9a%e0%b8%a7%e0%b8%b4%e0%b8%a8%e0%b8%a7%e0%b8%81","status":"publish","type":"post","link":"https:\/\/gulfthai.com\/?p=8158","title":{"rendered":"\u0e40\u0e17\u0e04\u0e42\u0e19\u0e42\u0e25\u0e22\u0e35 3D Printer \u0e2a\u0e33\u0e2b\u0e23\u0e31\u0e1a\u0e27\u0e34\u0e28\u0e27\u0e01\u0e23\u0e23\u0e21"},"content":{"rendered":"\n

\u0e15\u0e2d\u0e19\u0e17\u0e35\u0e48 1 \u0e0b\u0e37\u0e49\u0e2d 3D Printer<\/h2>\n\n\n\n

https:\/\/www.facebook.com\/anet3dprinterthailand<\/a><\/p>\n\n\n\n

<\/p>\n\n\n\n

Anet3d printer thailand – Machi_go<\/a><\/p>\n\n\n\n

K1 vs K1C
Creality K1C All Metal Extruder Update – When All Really Is Not All!<\/a><\/p>\n\n\n\n

Ender3 V3 SE \/ PRINT3DPRO=6,890 KORAT=
PLA, PETG, TPU(95A)
Nozzle Temperature:260\u2103 Heatbed Temperature:100\u2103<\/p>\n\n\n\n

3D Ender-3 S1 Pro \/ mamamoo1.th = 10,416<\/a>
<\/p>\n\n\n\n

<\/p>\n\n\n\n

<\/p>\n\n\n\n

<\/p>\n\n\n\n

<\/p>\n\n\n\n

\u0e15\u0e2d\u0e19\u0e17\u0e35\u0e48 2 <\/h2>\n\n\n\n

ABS <\/h2>\n\n\n\n
3D PRINTING FILAMENT<\/th>ABS<\/td><\/tr>
Density(g\/cm3<\/sup>)<\/th>1.04<\/td><\/tr>
Heat Distortion Temp(\u2103,0.45MPa)<\/th>78<\/td><\/tr>
Melt Flow Index(g\/10min)<\/th>12(220\u2103\/10kg\uff09<\/td><\/tr>
Tensile Strength(MPa)<\/th>43<\/td><\/tr>
Elongation at Break(%)<\/th>22<\/td><\/tr>
Flexural Strength(MPa)<\/th>66<\/td><\/tr>
Flexural Modulus(MPa)<\/th>1177<\/td><\/tr>
IZOD Impact Strength(kJ\/\u33a1)<\/th>29<\/td><\/tr>
Durability<\/th>8\/10<\/td><\/tr>
Printability<\/th>8\/10<\/td><\/tr>
Recommended printing parameters<\/strong><\/th><\/tr>
Extruder Temperature(\u2103)<\/th>230 \u2013 270\u2103
Recommended temperature\uff1a240\u2103<\/td><\/tr>
Bed temperature(\u2103)<\/th> 95 \u2013 110\u00b0C<\/td><\/tr>
Fan Speed<\/th> 0%<\/td><\/tr>
Printing Speed<\/th> 40 \u2013 100mm\/s<\/td><\/tr>
Heated Bed<\/th> Required<\/td><\/tr>
Recommended Build Surfaces<\/th>High temperature tape, PVP solid glue<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n

ePLA <\/h2>\n\n\n\n
3D PRINTING FILAMENT<\/th>ePLA-ST<\/td><\/tr>
Density(g\/cm3<\/sup>)<\/th>1.25<\/td><\/tr>
Heat Distortion Temp(\u2103,0.45MPa)<\/th>52<\/td><\/tr>
Melt Flow Index(g\/10min)<\/th>3.2\uff08190\u2103\/2.16kg\uff09<\/td><\/tr>
Tensile Strength(MPa)<\/th>34.3<\/td><\/tr>
Elongation at Break(%)<\/th>90<\/td><\/tr>
Flexural Strength(MPa)<\/th>43<\/td><\/tr>
Flexural Modulus(MPa)<\/th>1477<\/td><\/tr>
IZOD Impact Strength(kJ\/\u33a1)<\/th>63<\/td><\/tr>
Durability<\/th>4\/10<\/td><\/tr>
Printability<\/th>9\/10<\/td><\/tr>
Recommended printing parameters<\/strong><\/th><\/tr>
Extruder Temperature(\u2103)<\/th>200 \u2013 230\u2103
Recommended temperature\uff1a215\u2103<\/td><\/tr>
Bed temperature(\u2103)<\/th> 45 \u2013 60\u00b0C<\/td><\/tr>
Fan Speed<\/th> 100%<\/td><\/tr>
Printing Speed<\/th> 40 \u2013 100mm\/s<\/td><\/tr>
Heated Bed<\/th> Optional<\/td><\/tr>
Recommended Build Surfaces<\/th>Masking paper, PVP solid glue, PEI<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n

PLA+ <\/h2>\n\n\n\n
<\/tr>
D PRINTING FILAMENT<\/th>PLA+<\/td><\/tr>
Density(g\/cm3<\/sup>)<\/th>1.23<\/td><\/tr>
Heat Distortion Temp(\u2103,0.45MPa)<\/th>53<\/td><\/tr>
Melt Flow Index(g\/10min)<\/th>5\uff08190\u2103\/2.16kg\uff09<\/td><\/tr>
Tensile Strength(MPa)<\/th>63<\/td><\/tr>
Elongation at Break(%)<\/th>20<\/td><\/tr>
Flexural Strength(MPa)<\/th>74<\/td><\/tr>
Flexural Modulus(MPa)<\/th>1973<\/td><\/tr>
IZOD Impact Strength(kJ\/\u33a1)<\/th>9
2\/10<\/td><\/tr>
Durability<\/th>4\/10<\/td><\/tr>
Printability<\/th>9\/10<\/td><\/tr>
Recommended printing parameters<\/strong><\/th><\/tr>
Extruder Temperature(\u2103)<\/th>210 \u2013 230\u2103
Recommended temperature\uff1a215\u2103<\/td><\/tr>
Bed temperature(\u2103)<\/th> 45 \u2013 60\u00b0C<\/td><\/tr>
Fan Speed<\/th> 100%<\/td><\/tr>
Printing Speed<\/th> 40 \u2013 100mm\/s<\/td><\/tr>
Heated Bed<\/th> Optional<\/td><\/tr>
Recommended Build Surfaces<\/th>Masking paper, PVP solid glue, PEI<\/td><\/tr>
<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n

<\/h2>\n\n\n\n

Product Name: Hyper Series PLA<\/strong><\/p>\n\n\n\n

Wire Diameter: 1.75\u00b10.03mm<\/strong><\/p>\n\n\n\n

Net Weight: 1Kg\/2.2lb<\/strong><\/p>\n\n\n\n

Gross Weight: 1.29Kg\/2.8lb<\/strong><\/p>\n\n\n\n

Package Size: 210*210*70mm<\/strong><\/p>\n\n\n\n

Printing Temperature: 190-230\u00b0C<\/strong><\/p>\n\n\n\n

Hot Bed Temperature: 25\u2103~60\u2103<\/strong><\/p>\n\n\n\n

Printing Speed: 30-600mm\/s<\/strong><\/p>\n\n\n\n

Fan: 100%<\/strong><\/p>\n\n\n\n

Printing Platform: Carbon Silicon, PEI Platform Board, Textured Paper, PVP Solid Glue<\/strong><\/p>\n\n\n\n

Density: 1.25g\/cm\u00b3<\/strong><\/p>\n\n\n\n

Tensile Strength (X-Y): 52.991Mpa<\/strong><\/p>\n\n\n\n

Tensile Modulus (X-Y): 1146.064<\/strong><\/p>\n\n\n\n

Elongation at Break: 6.304%<\/strong><\/p>\n\n\n\n

Bending Strength (X-Y): 92.381Mpa<\/strong><\/p>\n\n\n\n

Flexural Modulus: (X-Y): 2490.178Mpa<\/strong><\/p>\n\n\n\n

Charpy Impact Strength (X-Y): 8.8344kJ\/m2<\/strong><\/p>\n\n\n\n

<\/p>\n\n\n\n

PETG <\/h2>\n\n\n\n
 PRINTING FILAMENT<\/th>PETG<\/td><\/tr>
Density(g\/cm3<\/sup>)<\/th>1.27<\/td><\/tr>
Heat Distortion Temp(\u2103,0.45MPa)<\/th>64<\/td><\/tr>
Melt Flow Index(g\/10min)<\/th>20\uff08250\u2103\/2.16kg)<\/td><\/tr>
Tensile Strength(MPa)<\/th>52.2<\/td><\/tr>
Elongation at Break(%)<\/th>83<\/td><\/tr>
Flexural Strength(MPa)<\/th>58.1<\/td><\/tr>
Flexural Modulus(MPa)<\/th>1073<\/td><\/tr>
IZOD Impact Strength(kJ\/\u33a1)<\/th>4.7<\/td><\/tr>
Durability<\/th>8\/10<\/strong><\/td><\/tr>
Printability<\/th>9\/10<\/td><\/tr>
Recommended printing parameters<\/strong><\/th><\/tr>
Extruder Temperature(\u2103)<\/th>230 \u2013 250\u2103
Recommended temperature\uff1a240\u2103<\/td><\/tr>
Bed temperature(\u2103)<\/th> 75 \u2013 90\u00b0C<\/td><\/tr>
Fan Speed<\/th> 100%<\/td><\/tr>
Printing Speed<\/th> 40 \u2013 100mm\/s<\/td><\/tr>
Heated Bed<\/th> Required<\/td><\/tr>
Recommended Build Surfaces<\/th>Masking paper, PVP solid glue<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n

<\/p>\n\n\n\n

eTPU-95A<\/h2>\n\n\n\n
3D PRINTING FILAMENT<\/th>eTPU-95A<\/td><\/tr>
Density(g\/cm3<\/sup>)<\/th>1.21<\/td><\/tr>
Heat Distortion Temp(\u2103,0.45MPa)<\/th>\/<\/td><\/tr>
Melt Flow Index(g\/10min)<\/th>1.2(190\u2103\/2.16kg)<\/td><\/tr>
Tensile Strength(MPa)<\/th>35<\/td><\/tr>
Elongation at Break(%)<\/th>\u2265800<\/td><\/tr>
Flexural Strength(MPa)<\/th>\/<\/td><\/tr>
Flexural Modulus(MPa)<\/th>\/<\/td><\/tr>
IZOD Impact Strength(kJ\/\u33a1)<\/th>\/<\/td><\/tr>
Durability<\/th>9\/10<\/td><\/tr>
Printability<\/th>6\/10<\/td><\/tr>
<\/td><\/td><\/tr>
Recommended printing parameters<\/strong><\/th><\/tr>
Extruder Temperature(\u2103)<\/th>220 \u2013 250\u2103
Recommended temperature\uff1a240\u2103<\/td><\/tr>
Bed temperature(\u2103)<\/th> 45 \u2013 60\u00b0C<\/td><\/tr>
Fan Speed<\/th> 100%<\/td><\/tr>
Printing Speed<\/th> 20 \u2013 50mm\/s<\/td><\/tr>
Heated Bed<\/th> Optional<\/td><\/tr>
Recommended Build Surfaces<\/th>Masking paper, PVP solid glue, PEI<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n

\u0e15\u0e2d\u0e19\u0e17\u0e35\u0e48 \u0e40\u0e17\u0e04\u0e42\u0e19\u0e42\u0e25\u0e22\u0e35 PA<\/h2>\n\n\n\n

\u0e40\u0e1b\u0e23\u0e35\u0e22\u0e1a\u0e40\u0e17\u0e35\u0e22\u0e1a PA \u0e22\u0e35\u0e48\u0e2b\u0e49\u0e2d\u0e15\u0e48\u0e32\u0e07\u0e46 https:\/\/all3dp.com\/2\/carbon-fiber-filament-explained-and-compared\/<\/a><\/p>\n\n\n\n

eSUN ePA-CF 1.75 mm Filament 1 KG \u0e23\u0e32\u0e04\u0e32 1750<\/p>\n\n\n\n

eSUN Nylon PA12 Filament 1.75mm 3D Printer Filament 1KG 3D Printing Filament for 3D Printer \u0e23\u0e32\u0e04\u0e32 2000 <\/p>\n\n\n\n

ePA-CF <\/h2>\n\n\n\n

eSUN ePA-CF<\/a> is a robust filament developed based on Nylon 6\/66 copolymer and enriched with 20% carbon fibre. It has increased strength, rigidity and toughness and can replace metal materials in many cases. Its self-lubricating wear resistance makes the filament ideal for printing gears.<\/p>\n\n\n\n

Filament Properties Table<\/strong><\/th><\/tr>
3D PRINTING FILAMENT<\/th>ePA-CF<\/td><\/tr>
Density(g\/cm3<\/sup>)<\/th>1.24<\/td><\/tr>
Heat Distortion Temp(\u2103,0.45MPa)<\/th>155<\/td><\/tr>
Melt Flow Index(g\/10min)<\/th>11.46(275\u2103\/5kg\uff09<\/td><\/tr>
Tensile Strength(MPa)<\/th>140<\/td><\/tr>
Elongation at Break(%)<\/th>10.61<\/td><\/tr>
Flexural Strength(MPa)<\/th>140<\/td><\/tr>
Flexural Modulus(MPa)<\/th>4363<\/td><\/tr>
IZOD Impact Strength(kJ\/\u33a1)<\/th>18.67<\/td><\/tr>
Durability<\/th>10\/10<\/td><\/tr>
Printability<\/th>8\/10<\/td><\/tr>
Recommended printing parameters<\/strong><\/th><\/tr>
Extruder Temperature(\u2103)<\/th>260 \u2013 300\u2103
Recommended temperature\uff1a280\u2103<\/td><\/tr>
Bed temperature(\u2103)<\/th> 45 \u2013 60\u00b0C<\/td><\/tr>
Fan Speed<\/th> 0%<\/td><\/tr>
Printing Speed<\/th> 40 \u2013 100mm\/s<\/td><\/tr>
Heated Bed<\/th> Optional<\/td><\/tr>
Recommended Build Surfaces<\/th>Masking paper, PVP solid glue, PEI<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n

SUN Nylon PA12 ePA12-CF<\/h2>\n\n\n\n
Filament Properties Table<\/strong><\/th><\/tr>
3D PRINTING FILAMENT<\/th>ePA12-CF<\/td><\/tr>
Density(g\/cm3<\/sup>)<\/th>1.24<\/td><\/tr>
Heat Distortion Temp(\u2103,0.45MPa)<\/th>94.1<\/td><\/tr>
Melt Flow Index(g\/10min)<\/th>8.91(270\u2103\/2.16kg)<\/td><\/tr>
Tensile Strength(MPa)<\/th>108.18<\/td><\/tr>
Elongation at Break(%)<\/th>9.02<\/td><\/tr>
Flexural Strength(MPa)<\/th>116.58<\/td><\/tr>
Flexural Modulus(MPa)<\/th>3335<\/td><\/tr>
IZOD Impact Strength(kJ\/m2<\/sup>)<\/th>11.33<\/td><\/tr>
Durability<\/th>10\/10<\/td><\/tr>
Printability<\/th>8\/10<\/td><\/tr>
Recommended printing parameters<\/strong><\/th><\/tr>
Extruder Temperature(\u2103)<\/th>270 \u2013 300\u2103
Recommended temperature\uff1a280\u2103<\/td><\/tr>
Bed temperature(\u2103)<\/th> 45 \u2013 60\u00b0C<\/td><\/tr>
Fan Speed<\/th> 0%<\/td><\/tr>
Printing Speed<\/th> 40 \u2013 100mm\/s<\/td><\/tr>
Heated Bed<\/th> Optional<\/td><\/tr>
Recommended Build Surfaces<\/th>Masking paper, PVP solid glue, PEI<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n

\u0e04\u0e27\u0e32\u0e21\u0e17\u0e19\u0e15\u0e48\u0e2d\u0e41\u0e23\u0e07\u0e14\u0e36\u0e07 (Tensile Strength) \u0e04\u0e37\u0e2d \u0e04\u0e27\u0e32\u0e21\u0e40\u0e04\u0e49\u0e19\u0e14\u0e36\u0e07\u0e2a\u0e39\u0e07\u0e2a\u0e38\u0e14\u0e15\u0e48\u0e2d\u0e2b\u0e19\u0e36\u0e48\u0e07\u0e2b\u0e19\u0e48\u0e27\u0e22\u0e1e\u0e37\u0e49\u0e19\u0e17\u0e35\u0e48\u0e02\u0e2d\u0e07\u0e0a\u0e34\u0e49\u0e19\u0e07\u0e32\u0e19\u0e17\u0e35\u0e48\u0e44\u0e14\u0e49\u0e23\u0e31\u0e1a\u0e08\u0e19\u0e40\u0e01\u0e34\u0e14\u0e01\u0e32\u0e23\u0e02\u0e32\u0e14<\/p>\n\n\n\n

MELT FLOW INDEX TESTER \u0e40\u0e1b\u0e47\u0e19\u0e40\u0e04\u0e23\u0e37\u0e48\u0e2d\u0e07\u0e17\u0e14\u0e2a\u0e2d\u0e1a\u0e2b\u0e32\u0e04\u0e48\u0e32 MFI. ( Melt Flow Index ), MFR. ( Melt Flow Rate ) \u0e2b\u0e23\u0e37\u0e2d MI \u0e04\u0e37\u0e2d \u0e14\u0e31\u0e0a\u0e19\u0e35\u0e01\u0e32\u0e23\u0e2b\u0e25\u0e2d\u0e21\u0e44\u0e2b\u0e25\u0e2b\u0e23\u0e37\u0e2d\u0e2d\u0e31\u0e15\u0e23\u0e32\u0e01\u0e32\u0e23\u0e44\u0e2b\u0e25\u0e02\u0e2d\u0e07\u0e40\u0e21\u0e47\u0e14\u0e1e\u0e25\u0e32\u0e2a\u0e15\u0e34\u0e01<\/p>\n\n\n\n

\u0e04\u0e27\u0e32\u0e21\u0e41\u0e02\u0e47\u0e07\u0e41\u0e01\u0e23\u0e48\u0e07\u0e41\u0e23\u0e07\u0e14\u0e31\u0e14 (Flexural strength) \u0e2b\u0e21\u0e32\u0e22\u0e16\u0e36\u0e07 \u0e01\u0e32\u0e23\u0e17\u0e35\u0e48\u0e27\u0e31\u0e2a\u0e14\u0e38\u0e2a\u0e32\u0e21\u0e32\u0e23\u0e16\u0e17\u0e19\u0e17\u0e32\u0e19\u0e15\u0e48\u0e2d\u0e41\u0e23\u0e07\u0e17\u0e35\u0e48\u0e08\u0e30\u0e17 \u0e32\u0e43\u0e2b\u0e49\u0e27\u0e31\u0e2a\u0e14\u0e38\u0e40\u0e01\u0e34\u0e14\u0e01\u0e32\u0e23 \u0e42\u0e04\u0e49\u0e07\u0e07\u0e2d \u0e2b\u0e23\u0e37\u0e2d\u0e04\u0e27\u0e32\u0e21\u0e41\u0e02\u0e47\u0e07\u0e14\u0e31\u0e14\u0e02\u0e2d\u0e07\u0e27\u0e31\u0e2a\u0e14\u0e38\u0e2b\u0e19\u0e36\u0e48\u0e07\u0e46<\/p>\n\n\n\n

Flexural modulus = property that is computed as the ratio of stress to strain in flexural deformation,
<\/p>\n\n\n\n

<\/p>\n\n\n\n

<\/p>\n\n\n\n

<\/p>\n\n\n\n

<\/p>\n\n\n\n

<\/p>\n","protected":false},"excerpt":{"rendered":"

\u0e15\u0e2d\u0e19\u0e17\u0e35\u0e48 1 \u0e0b\u0e37\u0e49\u0e2d 3D Printer https:\/\/www.facebook.com\/anet3dprinterthailand Anet3d printer thailand – Machi_go K1 vs K1CCreality K1C All Metal Extruder Update – When All Really Is Not All! Ender3 V3 SE \/ PRINT3DPRO=6,890 KORAT=PLA, PETG, TPU(95A)Nozzle Temperature:260\u2103 Heatbed Temperature:100\u2103 3D Ender-3 S1 Pro \/ mamamoo1.th = 10,416 \u0e15\u0e2d\u0e19\u0e17\u0e35\u0e48 2 ABS 3D PRINTING FILAMENT ABS Density(g\/cm3) 1.04 Heat
Complete Reading<\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_jetpack_memberships_contains_paid_content":false,"footnotes":""},"categories":[5],"tags":[],"class_list":["post-8158","post","type-post","status-publish","format-standard","hentry","category-engineering"],"jetpack_featured_media_url":"","jetpack_sharing_enabled":true,"_links":{"self":[{"href":"https:\/\/gulfthai.com\/index.php?rest_route=\/wp\/v2\/posts\/8158","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/gulfthai.com\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/gulfthai.com\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/gulfthai.com\/index.php?rest_route=\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/gulfthai.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=8158"}],"version-history":[{"count":4,"href":"https:\/\/gulfthai.com\/index.php?rest_route=\/wp\/v2\/posts\/8158\/revisions"}],"predecessor-version":[{"id":8779,"href":"https:\/\/gulfthai.com\/index.php?rest_route=\/wp\/v2\/posts\/8158\/revisions\/8779"}],"wp:attachment":[{"href":"https:\/\/gulfthai.com\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=8158"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/gulfthai.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=8158"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/gulfthai.com\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=8158"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}